Replace the Separation Pad

Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has scanned. When the machine scans 50,000 times, the machine will display a message on the Status Monitor to remind you to replace the Separation Pad.

Open the Top Cover (1) and the Front Cover (2).

Press and hold the buttons (1) on the inside of the Front Cover and then pull the Separation Pad Cover (2) down.

CAUTION

Be careful when touching the Separation Pad and its surrounding area in the machine. Otherwise, you could cause injury to yourself and serious damage to the machine.

Press and hold the green buttons (1) of the Separation Pad and then pull the Separation Pad (2) upward.

Attach a new Separation Pad into the Separation Pad Cover while supporting the cover.

Securely close the Separation Pad Cover until the hooks fit into the Front Cover.

Close the Front Cover and the Top Cover.

Reset the counter (see Reset the Usage Counters).

Note

Confirm the following items:

•	The value of Separation Pad Count is 0 (see Check Consumable Replacement Cycle).
•	The error message on the Status Monitor has been cleared.
•	The LCD does not show Replace Pad and Replace Parts.

Page Top