Scan Plastic Cards

Note

Load only one plastic card at a time.

Click the

(ControlCenter4) icon in the task tray and then select Open from the menu.

The ControlCenter4 window will appear.

Note

You can also start ControlCenter4 by doing one of the following:

•	(Windows^® XP, Windows Vista^®) Double-click the (ControlCenter4) icon in the task tray.
•	Click ControlCenter4 located in Start/All Programs/Brother/ADS-XXXX (where XXXX is your model name).

Select the Scan tab.

Right-click the button you want to use (

(Image),

(OCR),

(E-mail), or

(File)) and then select Button settings from the list. The setting dialog box will appear (the example below uses Image).

Check the Plastic Card Mode check box.

Change other settings if needed (see Change Scan Settings).

Click the button you selected in step 4.

The message dialog appears. Click the Start Scanning button.

The machine starts scanning.

Important

If a feed error should occur while scanning, open the front cover and carefully remove the plastic card in order to prevent damage to the card.

Note

•

Check the Don’t show me again. check box to not show the message dialog again.

•

Plastic Card Mode automatically uses these settings:

Resolution: 600 x 600 dpi

Document Size: 2 in 1 (Business Card)

Duplex(two-sided) Scanning: On (Short-edge binding)

Auto Deskew: Off

Multifeed Detection: Off

Automatic Image Rotation: Off

Original Layout	Scan Result