Search

Site Map

Home > Set Up Your Labeling System > Connect the Labeling System to an External Power Source

Connect the Labeling System to an External Power Source

IMPORTANT
To safeguard and back up the Labeling System's memory, DO NOT disconnect the Labeling System from the external power source if you are using it without a battery.

Connect to an AC Power Outlet Using the AC Adapter for USB Type-C (Optional)

image
  • The AC Adapter for USB Type-C is an optional accessory.
  • We recommend using the Brother AC Adapter for USB Type-C to ensure high performance. This AC Adapter is configured to the exact voltage and current requirements of this Brother machine.
  1. Connect the AC Adapter for USB Type-C to the Labeling System.
  2. Connect the AC Adapter plug to a nearby AC power outlet (AC 100 - 240 V, 50/60 Hz).
    image

Connect to a Computer Using a USB Type-C Cable

  1. Make sure the computer is on.
  2. Connect the Labeling System to the computer using the USB Type-C cable (included).
    image
    1. Computer USB Port

      5 V DC, 0.5 A or higher

    image
    To print labels, a Rechargeable Li-ion Battery must be installed and the printer must be connected to an external power source.

Connect to a USB Charger Using a USB Type-C Cable

  1. Connect the USB cable to the Labeling System.
  2. Connect the USB cable to a USB charger (not included) and plug the charger into a power source.
    image
    1. USB Charger (not included)

      5 V DC, 0.5 A or higher

    image
    To print labels, a Rechargeable Li-ion Battery must be installed and the printer must be connected to an external power source.
Related Information
Did you find the information you needed?

find moreaccept