Search

Site Map

Cable Wrap Mode

Create labels to be wrapped around a cable or wire using Cable Wrap mode. In Cable Wrap mode, the text is printed as shown so that when it's wrapped, the label can be read from all angles.

Custom

Custom

Rot.90

Rot.90
 image
image

  • (PT-E310BT) We recommend using Flexible ID Tape for Cable Wrap labels.

    (PT-E510/PT-E560BT) We recommend using Flexible ID Tape or Self-Laminating Tape for Cable Wrap labels.

  • Flexible ID Tape is not designed for use as electrical insulation. When wrapping Flexible ID Tape labels around objects, the diameter of the object (1) should be 3 mm or more. The overlapping ends of the label or the label flag (2) should be 5 mm or more.
    image
  1. Press image.
  2. Press image, image, image, or image to select the options you want, and then press OK.
    Option
    Description
    UOM

    Select one of the following units of measurement:

    Dia(Ø) (Custom Diameter), Length (Custom Length), CAT5/6, CAT6A, COAX, AWG, Rot.90 (Rotated 90°)

    Value

    The available values differ depending on the units of measurement you select.

    Repeat

    Repeat the text you enter so it prints as many times as needed.

    Cross-ID

    Select this setting when you create Cross-ID labels. See Related Information.

  3. Enter the text you want.
  4. Press image.
Related Information
Did you find the information you needed?

find moreaccept