Search

Home > Troubleshooting > Error and Maintenance Messages

Error and Maintenance Messages

PT-D410

Message Cause/Remedy

Check no. of digits entered

The number of digits entered in the barcode data does not match the number of digits set in the barcode parameters. Enter the correct number of digits.

Cutter error

The Tape Cutter Lever was pressed while trying to print or feed the tape. If the tape is jammed in the Cutter unit, remove the tape. Turn the Label Printer off and then on again before continuing.

Length limit

The printed label length using the text entered is longer than 999 mm. Edit the text so that the label length is less than 999 mm.

System error XX

Contact Brother customer service.

Text too long

The printed label length using the text entered is longer than the length setting. Edit the text to fit within the set length or change the length setting.

PT-D460BT

Message Cause/Remedy

Check no. of digits entered

The number of digits entered in the barcode data does not match the number of digits set in the barcode parameters. Enter the correct number of digits.

Cutter malfunction

If the tape is jammed in the Cutter unit, remove the tape. Turn the Label Printer off and then on again before continuing.

Label too long

The printed label length using the text entered is longer than 999 mm. Edit the text so that the label length is less than 999 mm.

System error XX

Contact Brother customer service.

Text too long

The printed label length using the text entered is longer than the length setting. Edit the text to fit within the set length or change the length setting.

Did you find the information you needed?