Home > Troubleshooting > Error and Maintenance Messages
Error and Maintenance Messages
PT-D410
| Message | Cause/Remedy |
|---|
| Check no. of digits entered | The number of digits entered in the barcode data does not match the number of digits set in the barcode parameters. Enter the correct number of digits. |
| Cutter error | The Tape Cutter Lever was pressed while trying to print or feed the tape. If the tape is jammed in the Cutter unit, remove the tape. Turn the Label Maker off and then on again before continuing. |
| Length limit | The printed label length using the text entered is longer than 39.37" (999 mm). Edit the text so that the label length is less than 39.37" (999 mm). |
| System error XX | Contact Brother Customer Service. |
| Text too long | The printed label length using the text entered is longer than the length setting. Edit the text to fit within the set length or change the length setting. |
PT-D460BT
| Message | Cause/Remedy |
|---|
| Check no. of digits entered | The number of digits entered in the barcode data does not match the number of digits set in the barcode parameters. Enter the correct number of digits. |
| Cutter malfunction | If the tape is jammed in the Cutter unit, remove the tape. Turn the Label Maker off and then on again before continuing. |
| Label too long | The printed label length using the text entered is longer than 39.37" (999 mm). Edit the text so that the label length is less than 39.37" (999 mm). |
| System error XX | Contact Brother Customer Service. |
| Text too long | The printed label length using the text entered is longer than the length setting. Edit the text to fit within the set length or change the length setting. |