Search

Site Map

Home > Set Up Your Printer > Load Paper in the Printer

Load Paper in the Printer

Load Paper in the Printer

  1. Use both hands to hold the paper straight.
  2. Insert the paper carefully, print surface face down, into the printer’s input slot until the roller pulls it into the starting position.
    image
    image
    • For fanfold paper

      Insert the fanfold paper with the black marks positioned as shown in the illustration.

      image
      1. Black marks
      2. Print surface
    image
    • The bottom edge of the paper must be parallel to the roller.
    • Only one side of the paper can be printed. Check the paper, and load it so that the smooth, thermal side faces down.
    • When loading A4-size paper, align the paper with the A4 Indicators on the printer. When loading Letter-size paper, align the paper with the LTR Indicators on the printer.
      image

Cut Paper

You can set the paper type to Cut Sheet, Roll, or Perforated Roll in the printer driver.
  1. Use the printer's Tear Bar to cut the paper.
  2. Pull one edge of the ejected paper up and towards the other edge diagonally.
    image
    1. Tear Bar
    CAUTION
    The Tear Bar is sharp. To avoid injury, do not touch the Tear Bar.
Related Information
Did you find the information you needed?

find moreaccept