Search

Site Map

Home > Appendix > Specifications

Specifications

Printing

Printing Technology

Direct Thermal

Print Speed *1

Maximum: 76.2 mm/s *2, 13.5 ppm *3

Print Resolution

(PJ-822/PJ-862) 203 x 200 dpi

(PJ-823/PJ-863/PJ-883) 300 x 300 dpi

Printable Area (Cut Sheet)

Configure with printer driver

(PJ-822/PJ-862) min. 94.7 mm x 42.2 mm - max. 207.2 mm x 2531.4 mm

(PJ-823/PJ-863/PJ-883) min. 94.8 mm x 42.3 mm - max. 208.6 mm x 2531.5 mm

*1
These figures vary by environment. Our standard environment is as follows:

When printing with a USB connection using a new Rechargeable Li-ion Battery that is fully charged in an environment with a temperature of 23°C using the JEITA J1 pattern.

*2
When printing on A4-size paper.
*3
When the Form Feed Mode setting is set to Fixed Page (paper size: A4) and printing continuously on roll paper.

Printer Size

Dimensions

Approximately 255 mm (W) x 55 mm (D) x 30 mm (H)

Weight

  • Approximately 480 g (including dummy battery, excluding paper)
  • Approximately 610 g (including the battery, excluding paper)

Interface

USB

USB Ver.2.0 (Full Speed) (Type C)

Printer class: Mass storage (16 MB of memory)

Bluetooth

(PJ-862/PJ-863/PJ-883)

Bluetooth Ver.5.2 (Classic + LE)

SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy)

Supported protocol: iAP

Wireless LAN (2.4 GHz)

(PJ-883)

IEEE 802.11 b/g/n (Infrastructure Mode)

IEEE 802.11 g/n (Wireless Direct Mode)

Wireless LAN (5 GHz)

(PJ-883)

IEEE 802.11 a/n (Infrastructure Mode)

Protocol (IPv4)

(PJ-883)

ARP, RARP, BOOTP, DHCP, APIPA (Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client
Protocol (IPv6)

(PJ-883)

NDP, RA, DNS Resolver, mDNS, LLMNR responder, LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client
Network Security (Wireless)

(PJ-883)

SSL/TLS 1.0/1.1/1.2/1.3 (HTTPS, IPPS)

SNMPv3, 802.1x (EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)

Wireless Network Security

(PJ-883)

WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA3-SAE (AES)

Wireless Certification

(PJ-883)

Wi-Fi Certification Mark License (WPA™/WPA2™/WPA3™ - Enterprise, Personal), Wi-Fi Protected Setup™ (WPS) Identifier Mark License

Environment

Operating Temperature

Operation:

Rechargeable Li-ion Battery (Optional): Between -10°C and 50°C

AC Adapter (Optional): Between -10°C and 40°C

Car Adapter (Optional): Between -10°C and 50°C

Charging: Between 0°C and 40°C

Operating Humidity

Between 20% and 80% (without condensation)

Power Supply

Rechargeable Li-ion Battery (Optional)

10.8 V

Adapter (Optional)

AC Adapter (15 V)

AC Adapter for USB Type-C (for charging only)

Car Adapter (Optional)

Cigarette car adapter or Wired type (12V (DC))

Battery Yield *1

Approximately 600 sheets

Charging Time *2

About 2 hours
*1
These figures vary by environment. Our standard environment is as follows:

JEITA J1 pattern printed continuously on A4 size paper when connected by the USB interface and the fully-charged battery is installed

Print density: 6

Environment temperature: 25ºC

*2
When using an AC adapter, AC Adapter for a USB Type-C cable, or Car Adapter.

Media Specification

Paper Size

A5 (148 x 210 mm), A4 (210 x 297 mm), Letter (216 x 279 mm), Legal (216 x 356 mm), continuous

Software

Printer Font Size

See the Command Reference on the Brother support website at support.brother.com.

Printer Font Face

Compatible Operating Systems

For the latest list of compatible software, visit support.brother.com.

Related Information
Did you find the information you needed?

find moreaccept