-

Adjust the printer’s printing density.

-

Set the cutting method when printing multiple labels.

Print Adjust (X)

-

Adjust the print position.

-

Adjust the print position.

-

Select the media exit location.

Tear Position

-

Adjust the tear position.

-

Select the printer’s printing speed.

-

Select the printing orientation.

-

Specify the period of time that passes before the printer turns off automatically.

-

Set the amount of time to pass before the printer automatically goes into sleep mode.

-

Set the contrast of the LCD. The higher the number, the stronger the contrast.

-

Switch the backlight on or off.

Sensor(Transmissive)

Adjust the precision of the sensor that detects the gaps (spacing) for die-cut labels.

Luminescence

Adjust the amount of light emitted by the transmissive/gap sensor.

Adjust the precision of the sensor that detects the black marks.

Adjust the amount of light emitted by the reflective/black mark sensor.

-

Select the display settings for the screen shown in standby mode.

-

Select whether a message appears before printing so that the number of copies can be confirmed.

Cont From Last

Select to serialise from the last number printed.

Select to serialise from the default number each time you print.

-

Reset the sequential number to the default number.

-

Specify the default value for the print quantity.

-

Directly enter the date into the template.

-

Directly enter the time into the template.

-

Display the printer information.

Print the printer setup information (missing dot test pattern, usage log, printer settings, wireless setting information and transfer data).

Print the printer usage log.

Print the printer settings.

Print the transfer data.

-

Select the type of command mode.

-

Select the date format for the clock.

-

Select the time format for the clock.

Language

-

Select the language of the LCD.

-

Select the measurement units for displayed settings.

Factory Reset

Returns all printer settings, including the communication settings and device settings, to their default values.

Templates and databases stored in the printer are also deleted.

User Data Reset

Returns all device settings to their default values.

Templates and databases stored in the printer are also deleted.

Returns the communication settings to their default values.

-

Turn the Airplane mode on or off.

When set to on, the WLAN and Bluetooth icons do not appear on the LCD.

-

Select whether to display the date and time on the LCD.

-

Check the status of the print head.

-

Select the checkboxes for any options you want to prevent changes from the printer's LCD.

After selecting the checkboxes, press or to select Finish, and then press OK to complete the settings.

If the Menu Locks are set, a lock icon is displayed for parameters that cannot be selected.

-

Select whether a passcode is required to enter the Administration mode. When set to on, specify the four-digit password.

-

Select whether to execute dump mode.

-

Turn the Web Based Management on or off.

Check if there is a firmware update available.

Set up regular checks for firmware updates and notifications when an update is available.

-

Specify TCP/IP settings.

-

Display the Wired LAN status.

-

Turn the WLAN function on or off.

-

Select the network mode when you set the WLAN function to on.

-

Try to connect to a nearby wireless access point/router.

-

Display the printer's eight-digit PIN.

-

Display the SSID of a nearby wireless access point/router.

After you select the SSID and press OK, the password entry screen appears.

-

Manually enter the SSID and password of a wireless access point/router to connect.

-

Specify TCP/IP settings.

Infrastructure Mode

Display the WLAN status.

-

Turn the Bluetooth function on or off.

Mode

-

Select the Bluetooth mode.

-

Print the Bluetooth address and corresponding barcode.

-

Switch to Automatic Reconnection mode (only for Apple devices: iPad, iPhone, or iPod touch).

-

Delete information for auto re-paired devices registered in the printer.

-

Set whether or not to press OK button on the Bluetooth pairing screen.

-

Set either high-security mode or normal mode.

-

Display the status of the Bluetooth function.

-

Select the paper size and paper type.

-

Detect the size of the set paper.

-

Set the width of margin.

-

Available only when the printer is connected to the FTP server and when the templates, databases, and other files need to be updated.

-

Available only when a USB flash drive containing saved templates, databases, and other files that need to be updated is connected to the printer.