Error and Maintenance LEDs

Home > Troubleshooting > Error and Maintenance LEDs

The LEDs light and flash to indicate the printer's status.

or or	LED is lit in the colour shown.
or or	LED is flashing in the colour shown.
	LED can be off, lit, or flashing in any colour.
	LED is off.

TD-4215D/TD-4425DN/TD-4525DN/TD-4425DNF

TD-4455DNWB/TD-4555DNWB/TD-4555DNWBF

TD-4215D/TD-4425DN/TD-4525DN/TD-4425DNF

Power LED	Roll LED	Status LED	Condition	Action
			The Roll Compartment Cover is open.	Close the Roll Compartment Cover until it locks into place.
			The Roll Compartment Cover is open.	Close the Roll Compartment Cover until it locks into place.
	Repeat (1 second off, 1 second on)	Repeat (1 second off, 1 second on)	Feed errors	Open the Roll Compartment Cover. Place the correct media in the printer. Confirm the media is correctly placed in the media path and correctly positioned relative to the sensors. Close the Roll Compartment Cover until it locks into place. Press to clear the error. Press and hold to turn the printer off.
	Repeat (1 second off, 1 second on)	Repeat (1 second off, 1 second on)	Media end error
		Repeat (1 second off, 1 second on)	Communication command error	Do one of the following: Open and close the Roll Compartment Cover. Press and hold . or press any key other than and . Press and hold to turn the printer off.
			Communication command error
			BLF file error
			Database search error
			No template error
			Maximum print length over
			ESC/P memory full error
			JPEG file error
		Repeat (0.9 seconds off, 0.3 seconds on, 0.3 seconds off, 0.3 seconds on)	Cutter error	Press and hold to turn the printer off.
			Mass storage error
			Print Head not detected


Repeat (0.3 seconds off, 0.3 second on)	Repeat (0.3 seconds off, 0.3 second on)	Repeat (0.3 seconds off, 0.3 second on)	System error	Contact Brother customer service.

TD-4455DNWB/TD-4555DNWB/TD-4555DNWBF

Power LED	Roll LED	Status LED	Condition	Action
			The Roll Compartment Cover is open.	Close the Roll Compartment Cover until it locks into place.
			Network setting error	Press and hold to clear the error.
			SSID input/out of setting range error
			Password input/out of setting range error
			Wrong password error



	Repeat (1 second off, 1 second on)	Repeat (1 second off, 1 second on)	Feed errors	Open the Roll Compartment Cover. Place the correct media in the printer. Confirm the media is correctly placed in the media path and correctly positioned relative to the sensors. Close the Roll Compartment Cover until it locks into place. Press to clear the error. Press and hold to turn the printer off.
	Repeat (1 second off, 1 second on)	Repeat (1 second off, 1 second on)	Media end error
		Repeat (1 second off, 1 second on)	Communication command error	Do one of the following: Open and close the Roll Compartment Cover. Press and hold . or press any key other than and . Press and hold to turn the printer off.
			Communication command error
			BLF file error
			Database search error
			No template error
			Time acquisition error
			Access point search error
			Access point connection error
			Maximum print length over
			ESC/P memory full error
			JPEG file error
			USB host memory full error
			Data update incomplete error (network)
			Data update incomplete error (USB)
			Firmware update incomplete error
		Repeat (0.9 seconds off, 0.3 seconds on, 0.3 seconds off, 0.3 seconds on)	Cutter error	Press and hold to turn the printer off.
			Mass storage error
			USB host power supply over error
			USB host non-compliant device connection error
			Print Head not detected
			USB hub connection error	Press and hold to turn the printer off, and then press restart the printer.
			USB hub connection error
Repeat (0.3 seconds off, 0.3 second on)	Repeat (0.3 seconds off, 0.3 second on)	Repeat (0.3 seconds off, 0.3 second on)	System error	Contact Brother customer service.

Related Information

Troubleshooting

Did you find the information you needed?