Search

Site Map

Home > Set Up Your Printer > Load Media Roll > Load a Linerless Roll

Load a Linerless Roll

To view all supported media rolls, import the Supported Lierless Roll list from Paper Size Setup in the Printer Setting Tool. For more information, see Related Topics: Printer Setting Tool (Windows): Paper Size Setup.

You can also visit https://support.brother.com/g/d/f4fi/l to download the Supported Linerless Roll list.

  1. Press and hold image to turn the printer off.
  2. Pull up the release levers on both sides of the printer to unlock the Roll Compartment Cover.
    image
  3. Hold the front of the printer, and firmly lift the Roll Compartment Cover to open it.
    image
    CAUTION
    Do not touch the Tear Bar with your hands. Doing so may result in injury.
  4. Rotate the Adjuster Dial to lock the Roll Guides in the appropriate position.
    image
    image
  5. Insert the roll so that the label's printing surface is facing up, as shown in the illustration.
    image
  6. Feed the end of the backing paper under the Media Guide Tips (1).
    image
  7. Feed the end of the roll through the Cutter Slot.
    image
  8. Close the Roll Compartment Cover until it locks into place.
    image
    CAUTION
    Be careful when closing the Roll Compartment Cover. There is a risk of injury if your finger gets pinched between the upper and lower parts of the cover.
IMPORTANT
  • Do not leave any printed labels in the printer. Doing so will cause label jams.
  • When the printer is not in use, remove any rolls from it and close the Roll Compartment Cover.
NOTE
  • When printing multiple labels, always remove the most recently-printed label to allow the next label to print.
  • If roll paper is jammed inside the Printer, open the Roll Compartment Cover and gently remove the paper. Do not use force to pull the paper out of the machine.
Related Information
Did you find the information you needed?

find moreaccept