Home > Printer Settings > Change Printer Settings Using the Printer > Settings Tables
Settings Tables
The Settings tables will help you understand the menu selections and options.
Some settings may differ depending on the firmware (printer software).
[Settings]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Print Density | - | Adjust the printer’s printing density. |
Auto Cut | - | Set the cutting method when printing multiple labels. |
Print Adjust (X) | - | Adjust the print position. |
Print Adjust (Y) | - | Adjust the print position. |
Exit Position | - | Select the media exit location. |
Tear Position | - | Adjust the tear position. |
Print Speed | - | Select the printer’s printing speed. |
Text Direction | - | Select the printing orientation. |
Auto Power Off | - | Specify the period of time that passes before the printer turns off automatically. |
Auto Sleep | - | Set the amount of time to pass before the printer automatically enters sleep mode. |
LCD Contrast | - | Set the contrast of the LCD. The higher the number, the stronger the contrast. |
Backlight | - | Switch the backlight on or off. |
Sensor(Transmissive) | Detection Sensitivity | Adjust the sensitivity of the sensor that detects the gaps (spacing) for die-cut labels. |
Luminescence | Adjust the amount of light emitted by the transmissive/gap sensor. | |
Sensor(Reflective) | Mark Detection | Adjust the precision of the sensor that detects the black marks. |
Luminescence | Adjust the amount of light emitted by the reflective/black mark sensor. | |
Charge Setting | - | Select the charge percentage to stop charging the battery. |
Home Screen | - | Select the screen displayed in standby mode. |
Cover Setting | - | Select the action after closing the Roll Compartment Cover. |
[Template Settings]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Confirm Print | - | Select whether a message appears before printing so that the number of copies can be confirmed. |
Serialize Mode | Cont From Last | Select to serialize from the last number printed. |
From Starting # | Select to serialize from the default number each time you print. | |
Serialize Reset | - | Reset the sequential number to the default number. |
Default Print Quantity | - | Specify the default value for the print quantity. |
Temporary Date | - | Enter the date directly into the template. |
Temporary Time | - | Enter the time directly into the template. |
Default Templates | - | Select whether or not to display preset templates. |
[Information]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Information | - | Display information when the information icon is displayed. |
Configuration | - | Display the printer information. |
Print Configuration | All | Print the printer setup information (missing dot test pattern, usage log, printer settings, wireless setting information, and transfer data). |
Usage Log | Print the printer usage log. | |
Printer Settings | Print the printer settings. | |
Transfer Data | Print the transfer data. | |
[Administration]
To prevent date and time changes made by printer operations, set a passcode for the [Administration] menu to ensure security.
Level 1 | Level 2 | Descriptions |
|---|---|---|
Command Mode | - | Select the type of command mode. |
Date Format | - | Select the date format. |
Time Format | - | Select the time format for the clock. |
 Language | - | Select the language of the LCD. |
Unit | - | Select the measurement units for displayed settings. |
Reset | Factory Reset | Returns all printer settings, including the communication settings and device settings, to their default values. Templates and databases stored in the printer are also deleted. |
User Data Reset | Returns all device settings to their default values. Templates and databases stored in the printer are also deleted. | |
Network Reset | Returns the communication settings to their default values. | |
Airplane Mode | - | Turn Airplane mode on or off. When set to on, WLAN and Bluetooth functions are deactivated. |
Time & date | AutoSync Time | Select whether or not to use the date and time obtained from an NTP server. |
Set Clock | Set the date, time, and display format (12-hour or 24-hour format). | |
Clock (On/Off) | Select whether to display the date and time on the LCD. | |
Print Head Check | - | Check the status of the Print Head. |
Menu Lock | - | Select the checkboxes for any options you want to prevent changes from the printer's LCD. After selecting the checkboxes, press If the Menu Locks are set, a lock icon is displayed for parameters that cannot be selected. |
Menu Security | - | Select if a passcode is required to enter the Administration mode. When set to on, specify the four-digit password. |
Dump Mode | - | Print information on data received to date. |
Web Based Management | - | Select whether to use Web Based Management. |
Firmware Update | Check Update | Check for updated firmware and implement the update. |
Update Notification | Set up periodic checks for firmware updates and receive notifications when updates are available. | |
[Remote Update] (Network)
Level 1 | Level 2 | Descriptions |
|---|---|---|
Remote Update | - | Available only when the printer is connected to the FTP server and when the templates, databases, and other files need to be updated. |
To set the FTP server information, you must first go to Communication Settings in the Printer Setting Tool.
[Update from USB] (USB Flash Drive)
Level 1 | Level 2 | Descriptions |
|---|---|---|
Update from USB | - | Available only when a USB flash drive containing saved templates, databases, and other files that need to be updated is connected to the printer. |
[Wired LAN]
Level 1 | Level 2 | Descriptions |
|---|---|---|
TCP/IP Settings | - | Specify TCP/IP settings. |
Wired LAN Status | - | Display the Wired LAN status. |
[WLAN]
Level 1 | Level 2 | Descriptions |
|---|---|---|
WLAN (On/Off) | - | Turn the WLAN function on or off. |
Network Mode | Infrastructure Mode | Select the network mode when you set the WLAN function to on. |
Direct Mode | ||
Infra/Direct Mode | ||
WPS Button Push | - | Try to connect to a nearby wireless access point/router. |
WPS PIN Code | - | Display the printer's eight-digit PIN. |
Infra Manual Setup | - | Establish a WLAN connection manually in infrastructure mode. Display the SSID of a nearby wireless access point/router. After you select the SSID and press OK, the password entry screen appears. |
Direct Manual Setup | - | Establish a WLAN connection manually in wireless direct mode. Manually enter the SSID and password of a wireless device. |
TCP/IP Settings | Auto | Specify TCP/IP settings. |
Static | ||
WLAN Assistant | - | Use the WLAN connection assistant function to configure your wireless network settings. |
WLAN Status | Infrastructure Mode | Display the WLAN status. |
Direct Mode | ||
[Bluetooth]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Bluetooth (On/Off) | - | Turn the Bluetooth function on or off. |
Mode | Classic & LE | Select Bluetooth mode. |
Classic | ||
Low Energy | ||
Print Barcode | - | Print the Bluetooth address and corresponding barcode. |
Automatic Reconnection | - | Switch to Automatic Reconnection mode (only for Apple devices: iPad, iPhone, or iPod touch). |
Clear History | - | Delete automatically paired devices registered in the printer. |
View Auth Code | - | Select whether to perform confirmation during Bluetooth pairing. |
Bluetooth Secure Connect | Standard Mode | Select the security mode for Bluetooth connection. |
Secure Mode | ||
Bluetooth Status | - | Display the status of the Bluetooth function. |
[Media]
Level 1 | Level 2 | Descriptions |
|---|---|---|
Selection | - | Select the paper size and paper type. |
Calibration | - | Detect the size of the set paper. |
Detection | - | Detect the width of the set paper. Display paper settings in the Selection option that match the detection results from the paper settings registered with the Printer Setting Tool. |
[Custom QR Code]
Display the custom QR code set with the Printer Setting Tool.
Did you find the information you needed?