Home > Routine Maintenance > Check the Print Head
Check the Print Head
Regularly checking the Print Head's condition can help maintain good print quality.
TD-2310D/TD-2320D/TD-2350D/TD-2320DF/TD-2350DF/TD-2320DSA/TD-2350DSA
To check the Print Head's condition using the Printer Setting Tool (Windows), follow these steps:
- Start the Printer Setting Tool.
Click
. - Click Device Settings.
- Click .
- Select On.
- Click Apply.
- Turn the printer off and then turn the printer on.
- Start the Printer Setting Tool.
Click
. - Click Device Settings.
- Click .
- Check head_disconnection_count in the Check Printer Information window.
- If the value of head_disconnection_count is other than zero, print the print pattern you are using.
- If there is no problem with the print quality, continue to use it.
- If there is any print quality problem, replace the Print Head.
TD-2350D/TD-2350DF/TD-2320DSA/TD-2350DSA
To check the Print Head's condition, follow these steps:
- Turn the printer on.
- Press Menu.
- Press
or
to select the following:
- Select [Administration]. Press OK.
- Select [Print Head Check]. Press OK.
The printer will show the results of the Print Head check. - Press OK to return to the menu.
- If there is any problem with the results, print the print pattern you are using.
- If there is no problem with the print quality, continue to use it.
- If there is any print quality problem, replace the Print Head.
Did you find the information you needed?