Search

Site Map

Settings Tables

Related Models:TD‑2320DSA / TD‑2350DSA
The Settings tables will help you understand the menu selections and options.
image
Some settings may differ depending on the firmware (printer software).

[Settings]

Level 1
Level 2
Descriptions
Print Density

-

Adjust the printer’s printing density.
Auto Cut

-

Set the cutting method when printing multiple labels.
Print Adjust (X)

-

Adjust the print position.
Print Adjust (Y)

-

Adjust the print position.
Exit Position

-

Select the media exit location.
Tear Position

-

Adjust the tear position.
Print Speed

-

Select the printer’s printing speed.
Text Direction

-

Select the printing orientation.
Auto Power Off

-

Specify the period of time that passes before the printer turns off automatically.
Auto Sleep

-

Set the amount of time to pass before the printer automatically enters sleep mode.
Display Brightness

-

Select the display brightness.
Sensor(Transmissive)
Detection Sensitivity
Adjust the sensitivity of the sensor that detects the gaps (spacing) for die-cut labels.
Luminescence
Adjust the amount of light emitted by the transmissive/gap sensor.
Sensor(Reflective)
Mark Detection
Adjust the precision of the sensor that detects the black marks.
Luminescence
Adjust the amount of light emitted by the reflective/black mark sensor.
Charge Setting

-

Select the charge percentage to stop charging the battery.
Beeper

-

Select the beep volume.
Home Screen

-

Select the screen displayed in standby mode.
Cover Setting

-

Select the action after closing the Roll Compartment Cover.

[Template Settings]

Level 1
Level 2
Descriptions
Touch Mode Setting

-

Select the template display style in template touch mode.
Confirm Print

-

Select whether a message appears before printing so that the number of copies can be confirmed.
Serialize Mode
Cont From Last
Select to serialise from the last number printed.
From Starting #
Select to serialise from the default number each time you print.
Serialize Reset

-

Reset the sequential number to the default number.
Default Print Quantity

-

Specify the default value for the print quantity.
Temporary Date

-

Enter the date directly into the template.
Temporary Time

-

Enter the time directly into the template.
Search Settings
Numerical search
Select the search mode to use.
Alphanumeric search
Default Templates

-

Select whether or not to display preset templates.

[Information]

Level 1
Level 2
Descriptions
Information

-

Display information when the information icon is displayed.
Configuration

-

Display the printer information.
Print Configuration
All
Print the printer setup information (missing dot test pattern, usage log, printer settings, wireless setting information, and transfer data).
Usage Log
Print the printer usage log.
Printer Settings
Print the printer settings.
Transfer Data
Print the transfer data.
Print History

-

View print history on the display.

[Administration]

To prevent date and time changes made by printer operations, set a passcode for the [Administration] menu to ensure security.
Level 1
Level 2
Descriptions
Command Mode

-

Select the type of command mode.
Date Format

-

Select the date format.
Time Format

-

Select the time format for the clock.
image Language

-

Select the language of the LCD.
Unit

-

Select the measurement units for displayed settings.
Reset
Factory Reset

Returns all printer settings, including the communication settings and device settings, to their default values.

Templates and databases stored in the printer are also deleted.

User Data Reset

Returns all device settings to their default values.

Templates and databases stored in the printer are also deleted.

Network Reset
Returns the communication settings to their default values.
Airplane Mode

-

Turn Airplane mode on or off.

When set to on, WLAN and Bluetooth functions are deactivated.

Database

-

Select the database stored in the printer and make edits to it.
Time & date
AutoSync Time
Select whether or not to use the date and time obtained from an NTP server.
Clock Manual Setup
Set the date, time, and display format (12-hour or 24-hour format).
Clock (On/Off)
Select whether to display the date and time on the LCD.
Print Head Check

-

Check the status of the Print Head.
Disable Edit

-

Disable transition to template editing Mode and prevent template editing.
Menu Lock

-

Select the checkboxes for any options you want to prevent changes from the printer's LCD.

After selecting the checkboxes, press image or image to select Finish, and then press OK to complete the settings.

If the Menu Locks are set, a lock icon is displayed for parameters that cannot be selected.

Menu Security

-

Select if a passcode is required to enter the Administration mode. When set to on, specify the four-digit password.
Dump Mode

-

Print information on data received to date.
Web Based Management

-

Select whether to use Web Based Management.
Firmware Update
Check Update
Check for updated firmware and implement the update.
Update Notification
Set up periodic checks for firmware updates and receive notifications when updates are available.

[Remote Update] (Network)

Level 1
Level 2
Descriptions
Remote Update

-

Available only when the printer is connected to the FTP server and when the templates, databases, and other files need to be updated.

To set the FTP server information, you must first go to Communication Settings in the Printer Setting Tool.

[Update from USB device]

Level 1
Level 2
Descriptions
Update from USB device

-

Available only when a USB flash drive containing saved templates, databases, and other files that need to be updated is connected to the printer.

[Wired LAN]

Level 1
Level 2
Descriptions
TCP/IP Settings

-

Specify TCP/IP settings.
Wired LAN Status

-

Display the Wired LAN status.

[WLAN]

Level 1
Level 2
Descriptions
WLAN (On/Off)

-

Turn the WLAN function on or off.
Network Mode
Infrastructure Mode
Select the network mode when you set the WLAN function to on.
Direct Mode
Infra/Direct Mode
WPS Button Push

-

Try to connect to a nearby wireless access point/router.
WPS PIN Code

-

Display the printer's eight-digit PIN.
Infra Manual Setup

-

Display the SSID of a nearby wireless access point/router.

After you select the SSID and press OK, the password entry screen appears.

Direct Manual Setup

-

Manually enter the SSID and password of a wireless device.　
TCP/IP Settings
Auto
Specify TCP/IP settings.
Static
WLAN Assistant

-

Use the WLAN connection assistant function to configure your wireless network settings.
WLAN Status
Infrastructure Mode
Display the WLAN status.
Direct Mode

[Bluetooth]

Level 1
Level 2
Descriptions
Bluetooth (On/Off)

-

Turn the Bluetooth function on or off.
Mode
Classic & LE
Select Bluetooth mode.
Classic
Low Energy
Print Barcode

-

Print the Bluetooth address and corresponding barcode.
Automatic Reconnection

-

Switch to Automatic Reconnection mode (only for Apple devices: iPad, iPhone, or iPod touch).
Clear History

-

Delete automatically paired devices registered in the printer.
View Auth Code

-

Select whether to perform confirmation during Bluetooth pairing.
Bluetooth Secure Connect
Standard Mode
Select the security mode for Bluetooth connection.
Secure Mode
Bluetooth Status

-

Display the status of the Bluetooth function.

[Media]

Level 1
Level 2
Descriptions
Selection

-

Select the paper size and paper type.
Calibration

-

Detect the size of the set paper.
Detection

-

Detect the width of the set paper. Display paper settings in the Selection option that match the detection results from the paper settings registered with the Printer Setting Tool.

[Custom QR Code]

Display the custom QR code set with the Printer Setting Tool.

Related Information
Did you find the information you needed?

find moreaccept