Search

Site Map

Home > Appendix > Auto Media Configuration > Use the Auto Media Configuration Function

Use the Auto Media Configuration Function

TD-2320D/TD-2320DF

Calibrate media information using the printer buttons.
  • Press and hold image until the Status LED lights up and then goes off.
    After calibration is complete, the detected media information is set on the printer.

TD-2350D/TD-2350DF/TD-2320DSA/TD-2350DSA

Calibrate media information using the LCD menu.
  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [Media]. Press OK.
    2. Select [Calibration]. Press OK.
      After calibration is complete, the detected media information is set on the printer.

Calibrate Media Information Using the Printer Setting Tool

  1. Connect the printer to the computer.
  2. Start the Printer Setting Tool.

    Click Start>Brother>Printer Setting Tool.

  3. Click Paper Size Setup.
  4. Click Edit or New.
  5. TD-2310D: Click Auto media configuration.
    After calibration is complete, the detected media information is set on the printer.
  6. TD-2320D/TD-2350D/TD-2320DF/TD-2350DF/TD-2320DSA/TD-2350DSA: Click the Auto media configuration.
    A list of detected printers appears.
  7. Click Import to apply the results to the paper size settings.
Related Information
Did you find the information you needed?

find moreaccept