RJ-2050

Specifications

Printing

Printing technology Direct Thermal
Print resolution 203 dpi
Print speed (Depends on the media used.) Maximum 6 ips (152 mm/sec)
(Under Brother standard environment)
Maximum print width Receipt: 1.89" (48 mm)
Label: 2" (51 mm)
Maximum print length 39.37" (1 m)
Minimum print length 0.5" (12.7 mm)

Size

Weight (including battery) Approximately 1.03 lb./465 g
Dimensions Approximately 3.9 (D) x 4.8 (W) x 2.2 (H) in. / 100 (D) x 122 (W) x 57 (H) mm

Interface

USB USB Ver. 2.0 (Full Speed) (mini-B)
Bluetooth Ver 2.1 + EDR
Supported profiles: SPP, OPP, BIP, HCRP
Supported protocol: iAP
Wireless LAN IEEE802.11g/n (Wireless Direct)
IEEE802.11b/g/n (Infrastructure Mode)
IEEE802.11b/g/n (Ad-hoc Mode) *1

Environment

Operating temperature Operate: 14°F to 122°F (-10°C to 50°C)
Charge: 32°F to 104°F (0°C to 40°C)
Operating humidity 10% to 90%
(No condensation, Maximum wet bulb temperature: 80.6 °F/ 27 °C)
Storage temperature -4°F to 140°F (-20°C to 60°C)
Do not leave your printer inside a car where the temperature is over 140°F (60°C).
Storage humidity 10% to 90%
(No condensation, Maximum wet bulb temperature: 113°F/ 45°C)

Power supply

Battery Rechargeable Li-ion battery: 7.2 V
Adapter (optional) AC adapter (15 V)
Car adapter (optional) Cigarette lighter car adapter (12 V (DC))
Maximum number of labels 6,400 labels (for continuous printing when connected using USB and using a new, fully charged rechargeable Li-ion battery)
Tested using Brother's print test data (13% coverage, 2" x 1" (51 x 25.4 mm)) at 73.4°F (23°C).
Charging time 3 hours (when charging at 73.4°F (23°C) with the printer turned off, and using a new rechargeable Li-ion battery)

Media specification

Media type Receipt, Label *2
Media width 2" (51 mm)
Thickness Receipt: 2.3 mil to 3.5 mil (0.058 mm to 0.090 mm)
Label: 3.2 mil to 6.7 mil (0.080 mm to 0.170 mm) *2
Roll outside diameter (max) 1.57" (40 mm)
Core diameter (min) Receipt, Label *2: 0.41" (10.2 mm)
Media sensor Reflective
*1 Not all computers, mobile devices, and operating systems, may support Ad-hoc mode.
*2 Only when there are black marks on the back of the backing paper.