PJ-883

Specifications

Printing

Printing Technology Direct Thermal
Print Speed *1

Maximum: 76.2 mm/s *2, 13.5 ppm *3
Print Resolution

300 x 300 dpi
Printable Area (Cut Sheet)

Configure with printer driver

min. 94.8 mm x 42.3 mm - max. 208.6 mm x 2531.5 mm
*1
These figures vary by environment. Our standard environment is as follows:

When printing with a USB connection using a new Rechargeable Li-ion Battery that is fully charged in an environment with a temperature of 23°C using the JEITA J1 pattern.

*2
When printing on A4-size paper.
*3
When the Form Feed Mode setting is set to Fixed Page (paper size: A4) and printing continuously on roll paper.

Printer Size

Dimensions

Approximately 255 mm (W) x 55 mm (D) x 30 mm (H)

Weight

  • Approximately 480 g (including dummy battery, excluding paper)
  • Approximately 610 g (including the battery, excluding paper)

Interface

USB

USB Ver.2.0 (Full Speed) (Type C)

Printer class: Mass storage (16 MB of memory)

Bluetooth

Bluetooth Ver.5.2 (Classic + LE)

SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy)

Supported protocol: iAP

Wireless LAN (2.4 GHz)

IEEE 802.11 b/g/n (Infrastructure Mode)

IEEE 802.11 g/n (Wireless Direct Mode)

Wireless LAN (5 GHz)

IEEE 802.11 a/n (Infrastructure Mode)

Protocol (IPv4) ARP, RARP, BOOTP, DHCP, APIPA (Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client
Protocol (IPv6) NDP, RA, DNS Resolver, mDNS, LLMNR responder, LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP, Web Services (Print), SNTP Client
Network Security (Wireless)

SSL/TLS 1.0/1.1/1.2/1.3 (HTTPS, IPPS)

SNMPv3, 802.1x (EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)

Wireless Network Security

WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA3-SAE (AES)
Wireless Certification Wi-Fi Certification Mark License (WPA™/WPA2™/WPA3™ - Enterprise, Personal), Wi-Fi Protected Setup™ (WPS) Identifier Mark License

Environment

Operating Temperature

Operation:

Rechargeable Li-ion Battery (Optional): Between -10°C and 50°C

AC Adapter (Optional): Between -10°C and 40°C

Car Adapter (Optional): Between -10°C and 50°C

Charging: Between 0°C and 40°C

Operating Humidity

Between 20% and 80% (without condensation)

Power Supply

Rechargeable Li-ion Battery (Optional)

10.8 V

Adapter (Optional)

AC Adapter (15 V)

AC Adapter for USB Type-C (for charging only)

Car Adapter (Optional)

Cigarette car adapter or Wired type (12V (DC))

Battery Yield *1

Approximately 600 sheets

Charging Time *2

About 2 hours
*1
These figures vary by environment. Our standard environment is as follows:

JEITA J1 pattern printed continuously on A4 size paper when connected by the USB interface and the fully-charged battery is installed

Print density: 6

Environment temperature: 25ºC

*2
When using an AC adapter, AC Adapter for a USB Type-C cable, or Car Adapter.

Media Specification

Paper Size

A5 (148 x 210 mm), A4 (210 x 297 mm), Letter (216 x 279 mm), Legal (216 x 356 mm), continuous