PT-P900W
Specifications
Size
| Dimensions | approx. 118 mm (W) x 192 mm (D) x 146 mm (H) | ||
| Weight | approx. 1508 g (without tape cassette, battery base and batteries) | ||
LED indicators
| Status indicator, Battery indicator, Power indicator, Wi-Fi indicator | |||
Buttons
| Power button, Feed&Cut button, Wi-Fi button | |||
Printing
| Method | Thermal Transfer | ||
| Print head | 454 dot/360 dpi | ||
| Print resolution | Standard 360 dpi x 360 dpi High resolution mode: 360 dpi x 720 dpi *1 High speed mode: 360 dpi x 180 dpi *1 High quality mode: 360 dpi x 360 dpi *2 | ||
| Print speed | AC Adapter: max. 60 mm/sec. (High resolution mode: max. 30 mm/sec.) *1 (High speed mode: max. 80 mm/sec) *1 (High quality mode: 20 mm/sec) *2 Battery: 20 mm/sec. - 60 mm/sec. (High quality mode: 20 mm/sec.) *2 Actual print speed varies depending on the conditions. | ||
| Cassette | ▪ Brother TZe tape cassette : 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm, 36 mm widths ▪ Brother FLe label cassette : 21 mm x 45 mm ▪ Brother HSe tube cassette : 5.8 mm, 6 mm, 8.8 mm, 9 mm, 11.7 mm, 12 mm, 17.7 mm, 23.6 mm 24 mm, 36mm widths | ||
| Maximum printing width | 32.0 mm | ||
Interface
| USB port | Version 2.0 Full Speed (Peripheral) | ||
| Wi-Fi | ▪ Wireless Direct: IEEE 802.11n ▪ Ad-hoc mode: IEEE 802.11b *3 ▪ Infrastructure mode: IEEE 802.11b/g/n ▪ WPS 2.0 | ||
| Serial port | RS232C (The serial adapter (optional) is required.) | ||
Power Supply
| Adapter | AC adapter (AD9100ESA): 24 V AC 100-240V 50/60 Hz | ||
| Battery (Optional) | Li-ion Battery (PA-BT-4000LI): 14.4 V | ||
| Auto Power-off | Li-ion Battery (PA-BT-4000LI): 30 min AC adapter (AD9100ESA): 4 h | ||
Other
| Cutter | Auto full cutter/auto “crack and peel” cutter | ||
| Operating temperature / humidity | When running: between 10°C and 35°C / between 20% and 80% max. wet bulb temperature: 27°C | ||
| *1 | The high resolution mode or high speed mode can be used if the AC adapter is connected and TZe laminated tape with black ink is installed. You cannot use this function for TZe-FX**1 tape. | ||
| *2 | The high quality mode can be used if TZe laminated tape with black ink is installed. You cannot use this function for TZe-FX**1 tape. If you cannot select the high quality mode using the printer driver, you must update the printer driver or firmware. | ||
| *3 | Not all computers, mobile devices, and operating systems, may support Ad-hoc mode. | ||
