HL-2270DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl2270dw_all.jpg)
HL-2270DW
Date: 30/07/2010 ID: faq00002541_002
Clean the paper pick-up roller.
Please follow the steps below to clean the paper pick-up roller:
- DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine.
- Be careful not to inhale toner.
- Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC power outlet.
- Pull the paper tray out of the machine.
- Remove all the paper, and anything that is stuck inside, from the paper tray.
- Tightly wring out a lint-free cloth soaked in lukewarm water, and then in the paper tray wipe the separator pad (1) to remove any dust.
- Wipe the two paper pick-up rollers (1) inside the machine.
- Put the paper back in the paper tray.
- Put the paper tray back in the machine.
- Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn on the machine's power switch
HL-2130, HL-2240D, HL-2250DN, HL-2270DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.