Innov-is NQ1400E
Perguntas frequentes e Solução de problemas |
Innov-is NQ1400E
Data: 09/08/2022 ID: faqh00000632_002
How do I remove or attach the presser foot ?
- Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine.
- Press (Needle position button) once or twice to raise the needle.
-
Press .
- When the message “OK to automatically lower the presser foot? ” appears on the LCD screen, press "OK" to continue.
- The screen changes, and all keys and operation buttons are locked (except ).
-
Raise the presser foot lever.
(1) Presser foot lever -
Use the included screwdriver to loosen the embroidery foot screw, and then remove the embroidery foot.
(1) Screwdriver (2) Embroidery foot
(3) Embroidery foot screw
-
Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the embroidery foot screw.
-
Slowly lower the presser foot lever.
-
Raise the presser foot lever to check that the embroidery foot is securely attached.
-
Press to unlock all keys and buttons.
Innov-is BP1430L, Innov-is BP1530L, Innov-is NQ1400E
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
Passo 1: quanto as informações nesta página auxiliaram você?
Passo 2: Vvocê gostaria de acrescentar algum comentário?
Note que este formulário é utilizado apenas para comentários.