FAQs & Troubleshooting
![]() |
Popular |
94 Results
1.
How to set up the cap frame driver. [Video instructions]
2.
How to Embroider on Cap. [Video instructions]
3.
Color thread table
4.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
5.
How to Embroider on Pet Collar. [Video instructions]
6.
How to Embroider on Shoes. [Video instructions]
7.
How to Embroider on Bag. [Video instructions]
8.
How to set up the cap frame. [Video instructions]
9.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
10.
Creating Beautiful Embroidery ( Hooping techniques )
11.
Why does the needle keep breaking?
12.
What is DST ?
13.
Loops appear on the surface of the fabric when embroidering.
14.
How do I use the embroidery sheet ?
15.
"Preventive maintenance is recommended" appears on the LCD.
16.
The thread tension is incorrect.
17.
Colors of Tajima (.dst) embroidery data
18.
Stabilizers (Backing)
19.
"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
20.
"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
21.
"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
22.
Embroidery pattern does not sew out correctly.
23.
Upper thread tightened up.
24.
Creating Beautiful Embroidery (Threads)
25.
Maintenance (Cleaning the bobbin case)
26.
The bobbin thread breaks.
27.
"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
28.
"This function cannot be used when patterns are overlapping." message appears on the LCD. What does it mean and how do I clear it?
29.
"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
30.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?