FAQs & Troubleshooting
Popular |
Innov-is 95E
34 Results
1.
Place a spool of thread on a spool pin.
2.
Where do I put the oil in my machine?
3.
How do I select patterns from the embroidery cards (sold separately)?
4.
How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
5.
It is difficult to pass the thread through the needle bar thread guide(hook).
6.
Embroidery
7.
Upper threading (Point)
8.
How do I correctly install a bobbin?
9.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
10.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
11.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
12.
"This pattern cannot be used." message appearing on the LCD. What does it mean?
13.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
14.
F** or "F*" appears on the LCD. What does it mean?
15.
How do I save often-used patterns in the machine's memory?
16.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
17.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
18.
"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
19.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
20.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
21.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
22.
"The safety device has been activated." appears on the LCD.
23.
Why is the outline sewing off the pattern?
24.
Fabrics and stabilizer material for embroidery
25.
When thread got tangled.
26.
"Lower the presser foot lever." appears on the LCD.
27.
"Deleting..." message appearing on the LCD. What does it mean?
28.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
29.
Why does the lower thread keep breaking?
30.
"Saving..." message appearing on the LCD. What does it mean?