Innov-is 95E
 |
FAQs & Troubleshooting |
Innov-is 95E
Date: 14/05/2015 ID: faqh00000021_000
Why is the outline sewing off the pattern?
This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.
-
Improper backing material (stabilizer) is put on the fabric.
Thick stabilizer has to be used for elastic or thin fabric.
One Point Advice Fabrics and stabilizer material for embroidery
- The fabric has to be set to the frame tight enough.
One Point Advice Embroidery
- Decrease the upper thread tension manually to the basic thread tension setting or less.
Related FAQs
Innov-is 1200, Innov-is 1500D/1500, Innov-is 4000D/4000, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 95E, Innov-is 980K, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V3, Innov-is V3 SE, Innov-is V7
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.