FAQs & Troubleshooting
Latest |
PR-600/600C
71 Results
1. 23/09/2020
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
2. 10/04/2018
How to set up the cap frame. [Video instructions]
3. 10/04/2018
How to set up the cap frame driver. [Video instructions]
4. 09/05/2017
How do I thread the machine? (Threading the upper thread)
5. 16/02/2017
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
6. 29/07/2016
When thread got tangled
7. 29/07/2016
Stabilizers (Backing)
8. 19/10/2015
Why does the upper thread keep breaking?
9. 19/10/2015
Maintenance (Oiling the machine)
10. 19/10/2015
Maintenance (Cleaning the bobbin case)
11. 19/10/2015
How do I install the bobbin wound with thread
12. 16/10/2015
Place a spool of thread on a spool pin
13. 16/10/2015
Embroidery
14. 16/10/2015
Hooping the Fabric
15. 10/08/2015
Fabric/stabilizer compatibility chart
16. 16/06/2014
How do I thread the needle. [Video instructions]
17. 16/06/2014
How do I thread my machine (Threading the upper thread). [Video instructions]
18. 24/01/2014
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the PR series?
19. 07/03/2008
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
20. 12/12/2007
"Preventive maintenance is recommended" appears on the LCD.
21. 01/02/2007
Why does my thread keep jamming?
22. 01/02/2007
Why won't the tension set on my sewing machine?
23. 01/02/2007
Why is the outline sewing off the pattern?
24. 01/02/2007
Why does the needle keep breaking?
25. 01/02/2007
Why won't the machine pick up the bobbin thread?
26. 01/02/2007
Recommendation accessories
27. 25/07/2006
Why cannot the needle threader be used?
28. 25/07/2006
Fabric and Thread
29. 18/07/2006
How do I create a space between characters?
30. 28/06/2006
"Impossible to reserve this needle." message appearing on the LCD. What does it mean and how do I clear it?