FAQs & Troubleshooting
Popular |
PR-600/600C
71 Results
1.
How to set up the cap frame. [Video instructions]
2.
How to set up the cap frame driver. [Video instructions]
3.
How do I thread my machine (Threading the upper thread). [Video instructions]
4.
How do I thread the needle. [Video instructions]
5.
How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
6.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
7.
How do I thread the machine? (Threading the upper thread)
8.
There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
9.
Hooping the Fabric
10.
"Preventive maintenance is recommended" appears on the LCD.
11.
"Impossible to set the start & the end points." message appearing on the LCD. What does it mean and how do I clear it?
12.
"Stop while needle bar case transferring." message appearing on the LCD. What does it mean and how do I clear it?
13.
Why won't the tension set on my sewing machine?
14.
Why is the outline sewing off the pattern?
15.
Place a spool of thread on a spool pin
16.
Maintenance (Oiling the machine)
17.
Maintenance (Cleaning the bobbin case)
18.
How do I create a space between characters?
19.
Recommendation accessories
20.
"Impossible to add any more character." message appearing on the LCD. What does it mean and how do I clear it?
21.
"Pocket read error." message appearing on the LCD. What does it mean and how do I clear it?
22.
Fabric/stabilizer compatibility chart
23.
"The thread number is invalid." message appearing on the LCD. What does it mean and how do I clear it?
24.
"Change to the big frame." message appearing on the LCD. What does it mean and how do I clear it?
25.
"No CompactFlash card." message appearing on the LCD. What does it mean and how do I clear it?
26.
"Needle case motor has been locked." message appearing on the LCD. What does it mean and how do I clear it?
27.
Why won't the machine pick up the bobbin thread?
28.
How do I install the bobbin wound with thread
29.
How do I confirm Windows®98SE?
30.
"Characters cannot be aligned." message appearing on the LCD. What does it mean and how do I clear it?