FAQs & Troubleshooting
Popular |
TJ-4121TN
103 Results
1.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
2.
How to load the Media
3.
Using the CommTool (for Windows)
4.
How to connect the printer to your computer
5.
How to update firmware to all printers on the same subnet at the same time
6.
How to set the Direct Thermal or Thermal Transfer Print Methods
7.
How to reset the printer settings by directly operating the printer
8.
Can I edit or print data created in other applications? (P-touch Editor 5.x for Windows)
9.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Paper".
10.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
11.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
12.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
13.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
14.
The left or right side of the label is not printed correctly.
15.
I installed "Printer Driver" and "Printer Driver for P-touch Editor" using a USB cable, but I cannot print with "Printer Driver for P-touch Editor".
16.
The label wraps around the platen roller when using the cutter.
17.
The label is skipped when printing.
18.
How to load the Ribbon
19.
How do I clean / maintain my printer?
20.
How do I select just certain data (cells) in the Excel spreadsheet to place on the label? (P-touch Editor 5.x for Windows)
21.
I cannot install the Windows driver.
22.
How to install the Windows driver via Wi-Fi®/ wired network
23.
How to install the Windows driver via Wi-Fi®/ wired network
24.
Printing the printer configuration (Self-test)
25.
The power indicator does not light.
26.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
27.
When printing with the thermal transfer method, the print or cutting position gradually shifts.
28.
How to set up the printer
29.
The printing position of small label is incorrect.
30.
When I open a CSV file in P-touch Editor, some characters are garbled. (P-touch Editor 5.x)