FAQs & Troubleshooting
Popular |
HL-2270DW
215 Results
1.
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup or AOSS™)
2.
The printer prints unexpectedly or it prints garbage data.
3.
REPLACE DRUM
4.
The Drum LED is still on or flashing after I replace the drum unit with a new one.
5.
Use the Network Connection Repair Tool (Windows)
6.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
7.
What is Brother iPrint&Scan?
8.
Configure the Brother machine for a wireless network with a USB cable using the Wireless setup wizard on the Brother installer application
9.
Reset the print server to the default factory settings.
10.
How to identify your Operating System (OS).
11.
Print the Network Configuration page.
12.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
13.
MANUAL FEED
14.
REPLACE TONER
15.
I cannot connect my machine to the wireless network (For Windows)
16.
JAM REAR
17.
The printer status is Offline or Paused.
18.
What can happen if the wrong paper is used in your machine.
19.
I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
20.
I cannot install Brother drivers on Debian 10 or later (Linux)
21.
Set up my Brother machine's automatic 2-sided(duplex) or booklet print.
22.
Unable to print or scan when using Brother iPrint&Scan from my Windows Phone® mobile device.
23.
Can I print from or scan to Android™ Smartphone?
24.
Stop the paper feeding twice through the machine when printing single pages with 2-sided(duplex) switched to on in the printer driver. (For Windows Only)
25.
Protect your Brother machine against unauthorised access over the network
26.
NO PAPER T1
27.
FRONT COVER OPEN or FUSER COVER OPEN
28.
"Offline" appears on the Status Monitor.
29.
Can I print from and scan to iPhone, iPod touch and iPad?
30.
Change the printer driver settings (Windows/macOS)