FAQs & Troubleshooting
Popular |
FAX-2910
79 Results
1.
My documents are not feeding through the Automatic Document Feeder (ADF) when I try to send a fax, scan to the PC, or make a copy. What can I do?
2.
Set the Brother machine to prevent public access to certain features.
3.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
4.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Life End" or the Toner LED is still on or flashing.
5.
What is Distinctive Ring and how do I program it?
6.
How do I load legal size paper in the paper tray?
7.
Can I confirm that the FAX was sent correctly?
8.
My Brother machine misfeeds paper.
9.
Change the quality of the faxes I send (Fax Resolution).
10.
"Paper Jam Tray" error appears on the LCD. What should I do?
11.
Document Jam
12.
How do I print the received faxes that are stored in memory? (Fax Storage)
13.
What does "NG" or "ERROR" on the Transmission Verification Report mean?
14.
What is the "Station ID" and how do I set it?
15.
What can happen if the wrong paper is used in your machine.
16.
My Brother machine has no power.
17.
Change Drum Soon
18.
Replace the drum unit.
19.
How do I adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine?
20.
Can I set my Brother machine to forward the faxes I receive to another location?
21.
Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feeding paper. How can I reduce the time it takes to start feeding paper?
22.
How do I clean white or black spots on printed documents?
23.
How do I clear vertical lines or streaks that appear in the copies I made?
24.
When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards?
25.
Verify if the Brother machine has a dial tone
26.
How do I check if the FAX/MFC has faxes in its memory when it has a mechanical problem?
27.
What are the recommended specifications for the paper I should use on my product?
28.
How can I forward a fax to another fax machine when the FAX/MFC has a mechanical problem?
29.
The back cover is securely closed, however the message "Back Cover Open" is displayed on the LCD. How do I clear this message?
30.
How can I clear the "Drum Error" or the "Dust on Drum" error message on the LCD?