1.

How to connect the printer to your computer (for Windows)

2.

How to install the Mac driver via USB/ Wi-Fi®/ wired network

3.

I cannot install the Windows driver.

4.

The left or right side of the label is not printed correctly.

5.

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

6.

How to add a new stock from the Seagull driver

7.

Using the CommTool (for Windows)

8.

How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)

9.

Printing is not possible.

10.

How to install the Windows driver via Bluetooth®

11.

How to execute the printer configuration (Self-test) to debug

12.

The print quality is poor.

13.

How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)

14.

How to update the firmware

15.

How to change the printer code page

16.

How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)

17.

I cannot connect the printer to my iOS/iPadOS device via Bluetooth® as another device connects to the printer automatically.

18.

How to get Bluetooth MAC Address with the CommTool (for Windows)

19.

I can no longer print from my computer via Bluetooth®, even though I could print previously.

20.

Enable or disable Bluetooth Low Energy (BLE)

21.

How to get an alert log file using the BPM (Brother Printer Management Tool) (for Windows)

22.

How to transfer the print programs or templates using FBPL commands

23.

How to adjust the tear position in BarTender

24.

How to update firmware to all printers on the same subnet at the same time

25.

How to change the speed and density in BarTender

26.

My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)

27.

How to adjust the printout position

28.

How to clean the Platen Roller

29.

How to install the Roll Spacer Set (Optional)

30.

Where can I find the printer's network settings, such as IP address?