FAQs & Troubleshooting
Popular |
PE800
51 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
How do I adjust thread tension for embroidering?
3.
How do I hoop the fabric in the embroidery frame?
4.
How do I save the embroidery patterns in the machine’s memory?
5.
How do I adjust the sensitivity of the operation keys?
6.
How do I retrieve the patterns from the machine’s memory?
7.
How do I change the font type in the embroidery pattern?
8.
Where do I put the oil in my machine?
9.
How do I enter a line feed in the embroidery pattern?
10.
How do I attach or remove the embroidery frame ?
11.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
12.
How do I clean the race?
13.
How do I edit a single letter in the embroidery pattern?
14.
How do I change the needle ?
15.
Embroidery
16.
"Preventive maintenance is recommended" appears on the LCD.
17.
How do I wind the bobbin?
18.
How do I remove or attach the Embroidery foot ?
19.
Fabric puckers
20.
How do I attach or remove the Embroidery Unit?
21.
How do I thread the machine (Threading the upper thread)?
22.
Stitches are skipped
23.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
24.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
25.
"This USB media cannot be used." message appears on the LCD. What does it mean?
26.
"Not enough available memory to save." message appears on the LCD. What does it mean?
27.
How do I set the bobbin ?
28.
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
29.
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
30.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?