1.

How to use the magnetic sash frame (PRMS360 / PRMS360AP)  [Video instructions]

2.

Maintenance (Oiling the machine)

3.

How to Embroider on Pet Collar. [Video instructions]

4.

How to Embroider on Cap. [Video instructions]

5.

How to set up the cap frame. [Video instructions]

6.

How to Embroider on Shoes. [Video instructions]

7.

Maintenance (Oiling the machine) [ Video ]

8.

How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]

9.

How to Embroider on Bag. [Video instructions]

10.

Maintenance (Clean the hook) [ Video ]

11.

Fabric and Thread

12.

Maintenance (Cleaning around the needle plate) [ Video ]

13.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

14.

How to set up the cap frame driver. [Video instructions]

15.

How to set up the cap frame (PRCF5 / PRCF5AP)  [Video instructions]

16.

"Preventive maintenance is recommended" message appears on the LCD. What does it mean?

17.

Maintenance (Cleaning the thread paths of the upper threads) [ Video ]

18.

Maintenance (Cleaning the bobbin case) [ Video ]

19.

"Needle case motor has been locked." message appears on the LCD. What does it mean?

20.

Fabric/stabilizer compatibility chart

21.

There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.

22.

"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?

23.

"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?

24.

"Check upper and bobbin thread." message appears on the LCD. What does it mean?

25.

Embroidery Data Precautions (About the types of embroidery data that can be used.)

26.

How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?

27.

Maintenance (Cleaning the thread paths of the upper threads)

28.

Maintenance (Cleaning the bobbin case)

29.

How do I thread the machine? (Threading the upper thread)

30.

 Stabilizers (Backing)