FAQs & Troubleshooting
Popular |
94 Results
- 1How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 2How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 3How to Embroider on Bag. [Video instructions]
- 4How to use the Round frame (PRPRFK1) [Video instructions]
- 5How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 6How to use the the versatile magnetic frame [Video instructions]
- 7How to set up the cap frame. [Video instructions]
- 8How to Embroider on Shoes. [Video instructions]
- 9How to Embroider on Pet Collar. [Video instructions]
- 10How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 11How to set up the cap frame driver. [Video instructions]
- 12How to Embroider on Cap. [Video instructions]
- 13Maintenance (Oiling the machine) [ Video ]
- 14Maintenance (Cleaning around the needle plate) [ Video ]
- 15Maintenance (Clean the hook) [ Video ]
- 16There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 17How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 18How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 19Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 20Maintenance (Cleaning the bobbin case) [ Video ]
- 21How to Embroider on Clothes. [Video instructions]
- 22Maintenance (Cleaning around the needle plate)
- 23Embroidery
- 24Fabric and Thread
- 25Maintenance (Oiling the machine)
- 26How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 27When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 28"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 29"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 30"This pattern cannot be used." message appears on the LCD. What does it mean?
- 31Maintenance (Cleaning the thread paths of the upper threads)
- 32"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 33"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 34"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 35How do I thread the machine? (Threading the upper thread)
- 36Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 37How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 38"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 39Maintenance (Clean the hook)
- 40"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 41How do I install the bobbin wound with thread?
- 42Hooping the Fabric
- 43"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 44"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 45"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 46"Trimming sensor error." message appears on the LCD. What does it mean?
- 47"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 48"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 49"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 50"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?