Innov-is XV8500D
常見問題&故障排除 |
Innov-is XV8500D
依…排序
71 結果
31. 29/07/2016
"Cannot recognize the fabric edge." message appears on the LCD. What does it mean?
32. 29/07/2016
"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
33. 29/07/2016
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
34. 29/07/2016
"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
35. 29/07/2016
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
36. 29/07/2016
"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
37. 29/07/2016
"Sensor module error." message appears on the LCD. What does it mean?
38. 29/07/2016
"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
39. 29/07/2016
"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
40. 29/07/2016
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
41. 29/07/2016
"OK to delete the selected picture?" message appears on the LCD. What does it mean?
42. 29/07/2016
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
43. 29/07/2016
"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
44. 29/07/2016
"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
45. 29/07/2016
"Failed to save file." message appears on the LCD. What does it mean?
46. 29/07/2016
"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
47. 29/07/2016
"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
48. 29/07/2016
"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
49. 29/07/2016
"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
50. 29/07/2016
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
51. 29/07/2016
"Lower the presser foot lever." message appears on the LCD. What does it mean?
52. 29/07/2016
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
53. 29/07/2016
"USB media error" message appears on the LCD. What does it mean?
54. 29/07/2016
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
55. 29/07/2016
"Cannot embroider since the embroidery unit is not attached. Turn off the machine, and then attach the embroidery unit." message appears on the LCD. What does it mean?
56. 29/07/2016
"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
57. 29/07/2016
"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean and how do I clear it?
58. 29/07/2016
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
59. 29/07/2016
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
60. 29/07/2016
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?