Innov-is 350SE
Vanliga frågor & felsökning |
Innov-is 350SE
Sortera efter
13 Resultat
1. 2024-05-20
F** or "F*" appears on the LCD. What does it mean?
2. 2016-03-31
"No more stitches can be combined." message appearing on the LCD. What does it mean?
3. 2016-03-31
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
4. 2016-03-31
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
5. 2016-03-31
"Winding bobbin thread." message appearing on the LCD. What does it mean?
6. 2009-04-07
"Lower the presser foot lever." appears on the LCD.
7. 2009-04-07
"Lift the buttonhole lever." appears on the LCD.
8. 2009-04-07
"The safety device has been activated." appears on the LCD.
9. 2009-03-04
"Release twin needle setting." message appearing on the LCD. What does it mean?
10. 2009-03-04
"Saving..." message appearing on the LCD. What does it mean?
11. 2009-02-26
"Can not change." message appearing on the LCD. What does it mean?
12. 2009-02-26
"Delete the selected pattern." appears on the LCD.
13. 2009-02-26
"Disconnect the foot control." appears on the LCD.