Innov-is 100
Часто задаваемые вопросы и устранение неполадок |
Innov-is 100
Сортировать по
8 Результаты
1. 20.05.2024
F** or "F*" appears on the LCD. What does it mean?
2. 31.03.2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
3. 31.03.2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
4. 07.04.2009
"Lower the presser foot lever." appears on the LCD.
5. 07.04.2009
"Lower the buttonhole lever." appears on the LCD.
6. 07.04.2009
"Lift the buttonhole lever." appears on the LCD.
7. 07.04.2009
"The safety device has been activated." appears on the LCD.
8. 26.02.2009
"Disconnect the foot control." appears on the LCD.
Сообщения об ошибках Часто задаваемые вопросы и устранение неполадок