CM300
![]() |
Vanlige spørsmål og feilsøking |
![](/g/b/img/product/hf_cm300euk.jpg)
CM300
Sorter etter
16 Resultater
1. 26.12.2018
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
2. 10.07.2017
Mat and Material Combinations
3. 10.07.2017
Mat and Cutting Blade Combinations
4. 10.07.2017
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
5. 10.07.2017
The mat is fed in at an angle and is not fed during cutting / drawing.
6. 10.07.2017
The mat or the material catches on a feed roller during cutting/drawing.
7. 10.07.2017
When the mat is inserted, the attached material peels off.
8. 10.07.2017
The material to be cut/drawn or original to be scanned cannot be attached to the mat.
9. 22.10.2015
The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
10. 19.08.2015
There are deep cuts completely through the mat.
11. 31.07.2015
The mat cannot be fed.
12. 31.07.2015
The mat cannot be recognized.
13. 22.01.2014
The mat cannot be inserted.
14. 28.11.2013
The mat or the material catches on a feed roller when the mat is being inserted.
15. 28.11.2013
The mat cannot be fed out.
16. 28.11.2013
The mat is fed in at an angle.