1. 12-07-2024

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

2. 12-07-2024

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

3. 12-07-2024

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

4. 09-07-2019

"This key cannot be used at this time." message appears on the LCD. What does it mean?

5. 09-07-2019

"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?

6. 09-07-2019

"Set the clock." message appears on the LCD. What does it mean?

7. 09-07-2019

"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?

8. 09-07-2019

"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?

9. 09-07-2019

"This USB media is incompatible." message appears on the LCD. What does it mean?

10. 09-07-2019

"This USB media cannot be used." message appears on the LCD. What does it mean?

11. 09-07-2019

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

12. 09-07-2019

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

13. 09-07-2019

"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?

14. 09-07-2019

"Check and rethread the upper thread." message appears on the LCD. What does it mean?

15. 09-07-2019

"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?

16. 06-08-2018

"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?

17. 02-05-2018

"This file cannot be used." message appears on the LCD. What does it mean?

18. 29-07-2016

"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?

19. 29-07-2016

"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?

20. 29-07-2016

"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?

21. 29-07-2016

"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?

22. 29-07-2016

"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?

23. 29-07-2016

"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?

24. 29-07-2016

"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?

25. 29-07-2016

"OK to delete the setting?" message appears on the LCD. What does it mean?

26. 29-07-2016

"OK to delete the selected pattern?" message appears on the LCD. What does it mean?

27. 29-07-2016

"Failed to save file." message appears on the LCD. What does it mean?

28. 29-07-2016

"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?

29. 29-07-2016

"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?

30. 29-07-2016

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?