FAQs & Troubleshooting
![]() |
Popular |

MFC-L2700DW
253 Results
1.
(Video) Load A4/Letter paper
2.
Load paper in the paper tray
3.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
4.
(Video) Replace Toner
5.
Turn the Toner Save Mode on or off.
6.
Enable the Brother machine's network interface.
7.
Toner Low or Prepare New Toner Cartridge
8.
My Brother machine could not be found over the network when I installed drivers on my PC.
9.
White spots or black spots at 94 mm (3.7 in.) intervals
10.
Manual Feed
11.
Image skewed
12.
I cannot print using my Brother machine on a wireless network (Mac)
13.
I cannot save a file downloaded from the Brother support website (For Windows)
14.
(Video) Set up your Brother machine
15.
Change the scan settings for scanning from ControlCenter4 or the SCAN key (For Windows)
16.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
17.
Out of Memory
18.
Lines across the page
19.
Confirm that a FAX I sent was received correctly.
20.
Print the Network Configuration Report
21.
Ghost
22.
Hollow print
23.
Can I print from and scan to iPhone, iPod touch and iPad?
24.
I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
25.
The network scanning feature does not work when pressing the scan key on my Brother machine control panel. (For Windows)
26.
Wireless setup is requesting a WPS PIN to complete the setup
27.
Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
28.
Delete print jobs from the print queue.
29.
Print a web page from iPrint&Scan when using an Android™ mobile device.
30.
Can I print from or scan to Android™ Smartphone?