TJ-4422TN
FAQ et Diagnostic |
TJ-4422TN
Trier par
23 Résultats
1. 12/06/2023
Some parts of the label are not printed. (P-touch Editor 5.x for Windows)
2. 18/04/2022
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
3. 13/12/2021
How to adjust the cut position (For Windows)
4. 13/12/2021
How to set the Direct Thermal or Thermal Transfer Print Methods
5. 02/03/2021
Printed barcodes cannot be read.
6. 29/01/2021
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
7. 29/01/2021
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
8. 28/09/2020
Printing the printer configuration (Self-test)
9. 28/09/2020
The print quality is poor.
10. 28/09/2020
The left or right side of the label is not printed correctly.
11. 28/09/2020
The printed label is wrinkled.
12. 28/09/2020
How to skip the AUTO.BAS program only one time by directly operating the printer
13. 28/09/2020
How to execute the printer configuration (Self-test) to debug
14. 28/09/2020
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
15. 28/09/2020
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
16. 24/06/2020
The printed label contains gray lines.
17. 20/02/2020
When printing with the thermal transfer method, the print or cutting position gradually shifts.
18. 13/03/2019
The printing position of small label is incorrect.
19. 13/03/2019
The label is skipped when printing.
20. 13/03/2019
How to change the speed and density in BarTender
21. 13/03/2019
How to change the printer code page
22. 13/03/2019
How to adjust the tear position in BarTender
23. 13/03/2019
How to adjust the printout position