FAQs & Troubleshooting
![]() |
Popular |

HL-1212W
156 Results
1.
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup™ or AOSS™)
2.
(Video) Load A5 paper
3.
(Video) Load A4/Letter paper
4.
Replace Toner
5.
Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM with a USB cable.
6.
Replace Drum
7.
(Video) Setup a Brother machine on a wireless (Wi-Fi) network.
8.
No Paper
9.
(Video) Unpack your Brother machine
10.
Jam Tray
11.
Jam Inside
12.
What do the LED indications mean?
13.
Reset the network settings to the factory default
14.
(Video) Set up your Brother machine
15.
"Offline" appears on the Status Monitor.
16.
Load paper in the paper tray
17.
No Toner
18.
Cover is Open
19.
Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM without a USB cable.
20.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
21.
Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
22.
What is Brother iPrint&Scan?
23.
Heater Error or Self-Diagnostic
24.
Drum End Soon
25.
Install your Brother machine's driver to print and scan from your Mac (macOS 10.14 or earlier)
26.
How to identify your Operating System (OS).
27.
Print Unable or Print Unable XX
28.
Toner Low
29.
Turn the Toner Save Mode on or off.
30.
The printer status is Offline or Paused.