TJ-4020TN
 |
Preguntas frecuentes y solución de problemas |
TJ-4020TN
Ordenar por
19 Resultados
1. 13/12/2021
How to adjust the cut position (For Windows)
2. 13/12/2021
How to set the Direct Thermal or Thermal Transfer Print Methods
3. 10/12/2021
How to execute the printer configuration (Self-test) to debug
4. 10/12/2021
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
5. 10/12/2021
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
6. 29/01/2021
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
7. 29/01/2021
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
8. 27/10/2020
Printing the printer configuration (Self-test)
9. 24/06/2020
The left or right side of the label is not printed correctly.
10. 24/06/2020
The print quality is poor.
11. 20/02/2020
When printing with the thermal transfer method, the print or cutting position gradually shifts.
12. 19/02/2020
Printing is not possible.
13. 13/03/2019
The printing position of small label is incorrect.
14. 13/03/2019
How to skip the AUTO.BAS program only one time by directly operating the printer
15. 13/03/2019
How to change the speed and density in BarTender
16. 13/03/2019
How to change the printer code page
17. 13/03/2019
How to adjust the tear position in BarTender
18. 13/03/2019
How to adjust the printout position
19. 13/03/2019
How to add a new stock from the Seagull driver