1. 13-12-2021

How to adjust the cut position (For Windows)

2. 13-12-2021

How to set the Direct Thermal or Thermal Transfer Print Methods

3. 10-12-2021

How to execute the printer configuration (Self-test) to debug

4. 10-12-2021

How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer

5. 10-12-2021

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

6. 29-01-2021

How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)

7. 29-01-2021

How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)

8. 27-10-2020

Printing the printer configuration (Self-test)

9. 24-06-2020

The left or right side of the label is not printed correctly.

10. 24-06-2020

The print quality is poor.

11. 20-02-2020

When printing with the thermal transfer method, the print or cutting position gradually shifts.

12. 19-02-2020

Printing is not possible.

13. 13-03-2019

The printing position of small label is incorrect.

14. 13-03-2019

How to skip the AUTO.BAS program only one time by directly operating the printer

15. 13-03-2019

How to change the speed and density in BarTender

16. 13-03-2019

How to change the printer code page

17. 13-03-2019

How to adjust the tear position in BarTender

18. 13-03-2019

How to adjust the printout position

19. 13-03-2019

How to add a new stock from the Seagull driver