CM110
常见问题解答与故障排除 |
CM110
搜索结果排序
9 结果
1. 2017-07-10
Not all of the material to be cut is cut. Some areas remain uncut.
2. 2017-07-10
The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
3. 2017-07-10
The mat is fed in at an angle and is not fed during cutting / drawing.
4. 2017-07-10
The mat or the material catches on a feed roller during cutting/drawing.
5. 2017-06-09
I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
6. 2017-01-16
What should I do if the entire pattern is not cut?
7. 2017-01-16
What should I do if part of the material is not cut?
8. 2016-08-08
What should I do if the scanned and cut positions are misaligned?
9. 2015-08-19
There are deep cuts completely through the mat.