NX-400Q/400
FAQ & Fehlerbehebung |
NX-400Q/400
Sortierfolge
14 Ergebnisse
1. 20.05.2024
F** or "F*" appears on the LCD. What does it mean?
2. 31.03.2016
"Saving..." message appearing on the LCD. What does it mean?
3. 31.03.2016
"No more stitches can be combined." message appearing on the LCD. What does it mean?
4. 31.03.2016
"Delete the selected pattern." message appearing on the LCD. What does it mean?
5. 31.03.2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
6. 31.03.2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
7. 31.03.2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
8. 14.05.2015
"Change to the single needle mode." appears on the LCD.
9. 07.04.2009
"Lower the presser foot lever." appears on the LCD.
10. 07.04.2009
"Lower the buttonhole lever." appears on the LCD.
11. 07.04.2009
"Lift the buttonhole lever." appears on the LCD.
12. 07.04.2009
"The safety device has been activated." appears on the LCD.
13. 26.02.2009
"Can not change." message appearing on the LCD. What does it mean?
14. 26.02.2009
"Disconnect the foot control." appears on the LCD.