Innov-is V5 LE
FAQ & Fehlerbehebung |
Innov-is V5 LE
Sortierfolge
43 Ergebnisse
1. 09.07.2019
"This key cannot be used at this time." message appears on the LCD. What does it mean?
2. 09.07.2019
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
3. 09.07.2019
"Set the clock." message appears on the LCD. What does it mean?
4. 09.07.2019
"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
5. 09.07.2019
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
6. 09.07.2019
"This USB media is incompatible." message appears on the LCD. What does it mean?
7. 09.07.2019
"This USB media cannot be used." message appears on the LCD. What does it mean?
8. 09.07.2019
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
9. 09.07.2019
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
10. 09.07.2019
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
11. 09.07.2019
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
12. 09.07.2019
"Check and rethread the upper thread." message appears on the LCD. What does it mean?
13. 09.07.2019
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
14. 06.08.2018
"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
15. 02.05.2018
"This file cannot be used." message appears on the LCD. What does it mean?
16. 29.07.2016
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
17. 29.07.2016
"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
18. 29.07.2016
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
19. 29.07.2016
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
20. 29.07.2016
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
21. 29.07.2016
"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
22. 29.07.2016
"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
23. 29.07.2016
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
24. 29.07.2016
"OK to delete the setting?" message appears on the LCD. What does it mean?
25. 29.07.2016
"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
26. 29.07.2016
"Failed to save file." message appears on the LCD. What does it mean?
27. 29.07.2016
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
28. 29.07.2016
"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
29. 29.07.2016
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
30. 29.07.2016
"Lower the presser foot lever." message appears on the LCD. What does it mean?