FAQs & Troubleshooting
Popular |
DC200
256 Results
1.
The material to be cut/drawn peels off during cutting/drawing.
2.
About Blade Extension, Cutting Pressure and Mat
3.
How do I Change or Delete a Registered CanvasWorkspace Login ID?
4.
Cutting/Drawing by Tracing an Image
5.
About DesignNCut Manager
6.
Mat and Material Combinations
7.
List of Error Messages for CanvasWorkspace (Others)
8.
The mat is fed in at an angle and is not fed during cutting / drawing.
9.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
10.
How to set up the wireless connection using router’s WPS button. (Computer Instructions)
11.
About CaptureMat FUNCTION (Wireless Network Connection Only)
12.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
13.
How to set up the wireless connection using WLAN Assistant Wizard. (Computer Instructions)
14.
N12001 appears on the computer screen.
15.
The mat or the material catches on a feed roller during cutting/drawing.
16.
Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
17.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
18.
List of Error Messages
19.
How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection? (Mobile Device Instructions)
20.
How to set up the wireless connection using wireless network name (SSID) & network password (key). (Recommended Setup, Mobile Device Instructions)
21.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
22.
What type of cut files and projects containing cut data other than built-in patterns are available?
23.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
24.
How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
25.
How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
26.
E94001 appears on the computer screen.
27.
E00011 appears on the computer screen.
28.
How to register Your Machine with CanvasWorkspace
29.
Replacing the Blade
30.
Can rough material be cut?