1. 26.12.2018

If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?

2. 10.07.2017

Mat and Material Combinations

3. 10.07.2017

Mat and Cutting Blade Combinations

4. 10.07.2017

The material to be cut/drawn or original to be scanned peels off during cutting/scanning.

5. 10.07.2017

The mat is fed in at an angle and is not fed during cutting / drawing.

6. 10.07.2017

The mat or the material catches on a feed roller during cutting/drawing.

7. 10.07.2017

When the mat is inserted, the attached material peels off.

8. 10.07.2017

The material to be cut/drawn or original to be scanned cannot be attached to the mat.

9. 22.10.2015

The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.

10. 19.08.2015

There are deep cuts completely through the mat.

11. 31.07.2015

The mat cannot be fed.

12. 31.07.2015

The mat cannot be recognized.

13. 22.01.2014

The mat cannot be inserted.

14. 28.11.2013

The mat or the material catches on a feed roller when the mat is being inserted.

15. 28.11.2013

The mat cannot be fed out.

16. 28.11.2013

The mat is fed in at an angle.