FAQs & Troubleshooting
Popular |
DC200
256 Results
1.
About Blade Extension, Cutting Pressure and Mat
2.
About CaptureMat FUNCTION (Wireless Network Connection Only)
3.
Adjusting the Blade Extension
4.
Mat and Material Combinations
5.
The mat or the material catches on a feed roller during cutting/drawing.
6.
The material to be cut/drawn peels off during cutting/drawing.
7.
The mat is fed in at an angle and is not fed during cutting / drawing.
8.
How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable? (Windows only)
9.
List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
10.
Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
11.
Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
12.
Cutting/Drawing by Tracing an Image
13.
How do I Change or Delete a Registered CanvasWorkspace Login ID?
14.
List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
15.
How to create an account for CanvasWorkspace
16.
How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
17.
List of Error Messages
18.
List of Error Messages for CanvasWorkspace (Others)
19.
If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
20.
About DesignNCut Manager
21.
Replacement Criteria
22.
An error appears when trying to import a DXF file.
23.
Important Notice for using the Foil Transfer Starter Kit
24.
Replacing the Blade
25.
There are deep cuts completely through the mat.
26.
How to attach the material to the mat
27.
How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
28.
N11001 appears on the computer screen.
29.
E00003 appears on the computer screen.
30.
“Please register your machine on CanvasWorkspace for Web.” appears on the computer screen.