1.

Why doesn't the machine answer when receiving a call?

2.

What does "COMM.ERROR" on the LCD display mean?

3.

The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).

4.

Change or delete a Group stored at a One Touch/Speed Dial.

5.

How can I clear the "PAPER JAM" or "PRINTER JAM" error message?

6.

What does "NG" or "ERROR" on the Transmission Verification Report mean?

7.

I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do?

8.

The keys on the control panel do not respond.

9.

Can I send a fax without scanning the documents into memory?

10.

How do I store numbers on my Brother machine for easy dialing? (One Touch, Speed Dial)

11.

What is Distinctive Ring and how do I program it?

12.

Can I confirm that the FAX was sent correctly?

13.

Can I use non-Brother or third party supplies with the Brother machine?

14.

How do I clean the Scanner to improve the copy or fax quality?

15.

What does "MACHINE ERROR XX" mean?

16.

Stop my Brother machine from automatically redialing a busy number.

17.

Do I need a telephone line to send and receive faxes with my Brother machine?

18.

Can I print from and scan to iPhone, iPod touch and iPad?

19.

How do I adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine?

20.

I still see the "Toner Empty" message on the LCD even after replacing the toner cartridge.

21.

Can I reduce the size of a received fax on this machine?

22.

My FAX/MFC will not Dial. Why?

23.

What can happen if the wrong paper is used in your machine.

24.

I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine.

25.

Can I print from or scan to Android™ Smartphone?

26.

My Brother machine has no power.

27.

How do I print the received faxes that are stored in memory? (Fax Storage)

28.

Where can I find the serial number for my unit?

29.

How do I program the date and time?

30.

When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?