FAQs & Troubleshooting
Popular |
FAX-878
39 Results
1.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
2.
"DOCUMENT JAM" error appears on the LCD. What should I do?
3.
How do I connect an External Telephone?
4.
My FAX/MFC will not Dial. Why?
5.
How do I print the received faxes that are stored in memory? (Fax Storage)
6.
Can I reduce the size of a received fax on this machine?
7.
Can I print from or scan to Android™ Smartphone?
8.
Can I print from and scan to iPhone, iPod touch and iPad?
9.
Can an External Answering Device(TAD) be used instead of the built-in one?
10.
How does the "FAX/TEL" Mode work?
11.
Can I connect my External Answering Device in another room and still receive faxes?
12.
What is Distinctive Ring and how do I program it?
13.
How do I clean the print head?
14.
My Brother machine has no power.
15.
How to clear "PRINTHEAD OVERHEATED WAIT TO COOL" Error?
16.
Why are my sent faxes always received with a black vertical line down the page?
17.
When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?
18.
Do I need a telephone line to send and receive faxes with my Brother machine?
19.
How can I clear the "PAPER JAM" error message?
20.
Can I confirm that the FAX was sent correctly?
21.
Can I print a report that will show a listing of faxes I sent and received?
22.
I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?
23.
I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's a non fax call?
24.
What does the pseudo-ring (double ring) indicate in the F/T Mode?
25.
How do I know which receive mode to select?
26.
I am experiencing problems sending a fax, what can I do?
27.
How do I program the date and time?
28.
How do I improve the copy or fax quality?
29.
What does "NG" on the Transmission Verification Report mean?
30.
"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?